If you have any questions or comments, don't hesitate to contact us
Proudly made in the USA
Or you can call: (503)784-3751
Brought to you by: A&A Engineering
From time to time, we make subtle changes and improvements that may not be represented in the pictures and descriptions
above, but rest assured, that any changes we make, not represented here, will only enhance the performance of your Anchor-Caddie.
Anchor Caddie Bow Roller
(BR10003-1)
Stainless Steel Spring Loaded Pin & Cable Assembly (BRA10002)
Already included & installed, when you buy the Anchor
Caddie Bow Roller, but is a replacement or upgrade option for the Cadet. Comes with a stainless steel nut and bolt for installation.
1/8" Rubber, Insulator Plate
(BRA0006)
Used for mounting between you Anchor Caddie and your bow. Especially usefull for installation
on aluminum boats, but not necessary for installation on fiberglass boats.
Can also be used on the Cadet by trimming the end.
3/16" Aluminum, Load Spreader Plate
(BRA0007)
Used for mounting under the bow instead of washers. Helps strengthen you
bow by spreading the load more evenly under your Anchor Caddie BowRoller. Especially usefull for installation on aluminum boats, but
not be practical for installation on fiberglass boats due to the thickness and uneven fiberglass. We recommend individual Fender washers
for installation on fiberglass boats.
Can also be used on the Cadet by trimming the end.
Anchor Caddie Cleat Bracket
(BRA10001)
Introducing the Anchor Caddie Cadet! Its the little brother to the original Anchor Caddie, but designed for those who want Anchor
Caddie quality, but something smaller and more affordable.
(BRC10001-2)
It is the little brother of the Anchor Caddie, but follows the Anchor Caddie mantra of Stainless Steel and modularity. The Cadet is
offered in a clear brush finish that really brings out the beauty of the stainless steel. The width is identical to its big brother,
but the overall length is a shade over 11”, compared to the 18 1/2" of the Big Brother. It will also accomodate the same size anchors
as its big brother, up to 1 3/4" round bar and 1 1/2" square river anchors.
One of the exciting things about the Cadet is that
although it comes as an apparent cut and dry bow roller, you will also have upgrade options. Upgrade options will include the pin
& lanyard as well as the rear impact plate and external rollers that are currently part of the original Anchor Caddie Bow Roller.
At this point, the upgrade options are only available through this website.
Cadet, Complete Upgrade Kit (BRA10003)
+
Includes: 2, outside rollers, 2, stainless steel flat washers, 1, 6" stainless steel bolt, 1, stainless steel pin & lanyard, 1,
impact plate, 1, stainless steel machine screw and lock nut.
Instructions: Remove nut and 4" bolt from Cadet, throw the
4" bolt in your "Extra Hardware Bin", you may find a use for it down the road on another project. Follow the instructions found for
the original Anchor Caddie under "Assembly and Mounting Instructions" to mount the front rollers.
Attach the pin & lanyard
using the nut & screw to the small hole on the starboard side of the Cadet, nut on the inside.
Mount the black Impact plate
over the 2 aft holes that you mounted the Cadet to the boat with.
Also available at these authorized resellers
For shipping outside of the Continental U.S., please contact us for a shipping quote.
FREE Shipping to anywhere in the Continetal U.S.
Kelso True Value Hardware & Marine
300 Oak St.
Kelso, WA 98626
Phone: (360)636-3300
Island Marine Salvage
31750 Canaan Rd
Deer Island, OR 97054
Phone: (503) 366-0823
