Original - Clear Grain

28 REVIEWS
$189.95

Hurry! Only -75 Left in Stock!

Real time 11 visitor right now
Spend $299.00 to Free Shipping
PRODUCT INFORMATION
Specifications/Dimensions
Videos
CUSTOMER REVIEWS
Q & A
PRODUCT INFORMATION

This is the Clear Grain version of the original Gray Hammertone finish. It has all the same properties as the hammertone, but in a clear grain finish to bring out the beauty of the stainless steel below.

Made of clear powder coated 1/8" stainless steel. All stainless steel hardware. Mounting holes to accommodate 5/16" hardware (not included). Rollers, guards and impact plate, made of UV resistant high density polyethylene.

It is highly recommended to use an anti-seize compound on all stainless steel hardware installations.

See specifications here

See our installation video below for installing the Anchor Caddie or go to our Product Support page

Specifications/Dimensions

Original

Videos

This video shows the basic anchor nest installation. If you have a different model, the installation may vary slightly, but the method will be the same.

CUSTOMER REVIEWS

Customer Reviews

Based on 28 reviews Write a review
Q & A

QUESTIONS & ANSWERS

Ask a Question
  • Does this anchor nest come with the load spreader plates and rubber pad?

    Hi Jeffrey,

    No it does not come with the anchor nest. Not everybody needs or wants one.

    Thanks for the question!

    Regards,
    Paul Anderson

  • Due to old age and arthritis Would that anchor caddy and a Columbia River anchor work with a windless style anchor winch?

    Hi Dennis,

    It does not work well with a Windless system, sorry!

    Regards,
    Paul Anderson

  • What is the heaviest anchor I can use with the clear grain model

    Hi Robert,

    Even though we spoke on the phone, I wanted to answer here so other folks that may have the question can get the answer.

    As we discussed, it is not so much the anchor nest as it is the mounting that affects the anchor size. Assuming an adequate mounting, you could put as heavy an anchor as you can carry. But if I had to throw out a number, it could arguably hold an anchor well over 100 lbs.

    Thanks for the question!

    Regards,
    Paul Anderson

  • I would like to ship it to Malta Europe. Is it possible and how much would it cost?

    Hi Alessio,

    Yes it is possible. All you would need to do when checking out is put in the actual shipping address and it will calculate the cost after you select the shipping service you want.

    Thanks for the question!

    Regards,
    Paul Anderson

  • Does the anchor come with the locking pin or is that sold separately?? Thank u

    Hi Yen,

    Yes, as pictured on the product page.

    Thanks for the question, and thanks for the order!

    Regards,
    Paul Anderson

  • Was wondering what size anchor caddie would fit my boat best I have a 2020 hewescraft 190 sea runner.i ordered the anchor caddie gray hammer at my local west marine,but I forgot to ask for dimensions.

    Hi Pedro,

    The Anchor Caddie Original is about 18" long and about 3-1/2" wide and should fit perfectly on your Hewescraft 190.

    Regards,
    Paul Anderson

  • Was wondering if I can get an anchor nest sent to Canada on the Canadian website it says all sold out.

    Hi Justin,

    Unfortunately, during the pandemic, we are unable to get product up to Anchor Caddie Canada on a B2B level. You can however, order from the US site and we can ship direct to Canadian consumers.

    Hope this helps.

    Regards,
    Paul Anderson

  • I need a drawing of this item with dimensions including mounting hole pattern so that I can be sure it will work on the boat I am building. Can you help me with this?

    Hi Joe,

    Here's the link to our mounting instructions that should have what you are looking for. The only thing it doesn't have is the width, which is about 3-1/2" wide for the Original and 4-1/2" for the PRO.

    https://cdn.shopify.com/s/files/1/0266/2799/files/Anchor_Nest_Installation_Instructions.PDF?13568531067946986879

    Let me know if you have any more questions and thanks for your interest in Anchor Caddie.

    Regards,
    Paul Anderson

  • Will this caddie work with my Danforth type anchor

    Hi Benamin, Yes, it will work with a Danforth style anchor. I noticed that you placed an order a few minutes ago with our complete anchoring system, good choice!